Home / Shop
- Description
- Customer Reviews (0)
The Goonies 3-Pack of Screen Printed Plastisol Ink Heat Press Iron On T-Shirt Transfers Stencils DIY Make Your Own Hoodies!
AHOY, FELLOW GOONIES! Feeling crafty? Want to print some stuff with this nice collection of original fan-created artwork? You will get ALL 3 transfers with every 1 item you purchase. They will come with a copy of the application instructions (shown below). These are recommended to be applied with a commercial heat press, but technically you "can" use a household iron. I do not condone this method as it can yield unwanted results.
These transfers have been printed in black in reverse so that they will be right-reading when applied to a garment, tote bag, pillowcase, or what have you. They are a nice, thick, durable plastisol ink that is commonly used in silkscreen printing. Enjoy all of the benefits without any of the mess. Just slap them on your item of choice, follow the instructions below, and ENJOY YOUR NEW GOONIES GEAR!
These are YOURS. So do whatever you want with them. You can print shirts for yourself. Make a tote bag for your BFF. Press them onto tote bags or pillowcases to sell in your own Etsy shop or your favorite boutique shop.
Graphic measurements: Silhouettes - 11" wide x 4" Tall, Copper Bones - 10.5" Tall x 4" Wide, Doubloon - 8.5" Wide and Tall
The silhouette and doubloon graphics were created by a talented artist named, Félix de León. He lives in the Canary Islands, and has a PASSION for The Goonies. Check him out on social media if you get the chance. The copper bones image was created by me from a photograph that I took and digitized.
Each order will come with some kind of cool Goonies-related freebie. The Goonies is my favorite movie, and I love to surprise my customers with a little something extra.
For Material Types: Performance / Wicking 100% Polyester / Most Nylons: TEST FIRST
Press Settings: Temperature: 320˚, Pressure: Medium (6 - 8), Time: 10-12 Seconds, Peel Hot
For Material Types: 100% Cotton / Poly Blends, Cotton / Spandex Blends, Spandex
Press Settings: Temperature: 350˚, Pressure: Medium (6-8), Time:4-6 Seconds, Peel Hot
PREHEAT PLATEN: Prior to beginning, press empty pad for 3 cycles of 15 seconds. Failure to preheat pad will cause insufficient heat and will damage first 3 transfers.
STEP #1: LOAD GARMENT:
Prior to pressing, open the bottom of the garment and slide it over the platen. Pressing one side of the item at a time will eliminate ghost images/bleed through.
WARNING: If garment is laid on top of platen be sure to check for bleed through after pressing first garment.
STEP #2: PRE-PRESS GARMENT:
Press garment (with no transfer) for 3-5 seconds to remove moisture and wrinkles.
STEP #3: POSITION TRANSFER:
Place transfer in desired location, ink side down.
DO NOT cover transfer with Teflon sheet.
Do not place transfer on wrinkles, seams or creases in garment.
STEP #4: PRESS TRANSFER:
Close heat press and press for time & temperature according to garment.
Cotton & Blends: 4-6 Seconds, 350° Polyester: 10-12 Seconds, 320°
STEP #5: PEEL TRANSFER:
Open heat press, and peel transfer with a smooth steady motion.
If you do not get the desired effect, try the following:
Increase pressure
Increase temperature slightly
Peel transfer immediately after opening press
Verify platen has been pre-heated
Increase press time
Washing Instructions:
Machine wash cold with garment turned inside-out
Do NOT bleach
Tumble dry using the low heat setting
Do NOT iron design after applied